1. Dual AMD EPYCTM 7000-Series Processors
2. 2TB Registered ECC DDR4
2666MHz SDRAM in 16 DIMMs
3. Expansion slots:
2 PCI-E 3.0 x16
3 PCI-E 3.0 x8
4. 10 SATA3, 1 M.2, 2 SATA DOM
5. Dual Gigabit Ethernet LAN Ports
6. ASPEED AST2500 BMC graphics
7. Up to 2 USB 3.0 ports
Up to 4 USB 2.0 ports
8. 8 4-pin PWM Fan and Speed control
Dimensions:12" x 13.05" (30.5cm x 33.1cm)
CPU:Dual AMD EPYCTM 7000-series Processors
Cores:Up to 32 Cores
Chipset:System on Chip
Memory Capacity:16 DIMM sockets
Supports up to 2TB Registered ECC DDR4 2666MHz SDRAM in 16 DIMMs
8-channel memory bus
For Dual CPUs: Recommended that memory be populated equally in adjacent memory banks
See Detailed Memory Support Matrix
Memory Type:DDR4 2666 MHz Registered ECC, 288-pin gold-plated DIMMs
DIMM: Sizes8GB, 16GB, 32GB, 64GB, 128GB
Error Detection:Corrects single-bit errors
Detects double-bit errors (using ECC memory)
SATA:SATA3 (6 Gbps)
IPMI:Support for Intelligent Platform Management Interface v.2.0
IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
ASPEED AST2500 BMC
Network Controllers:2 1GbE LAN via Intel i350-AM21
1 Realtek RTL8211E PHY (dedicated IPMI)
VGA:ASPEED AST2500 BMC
Input / Output
SATA:10 SATA3 (6 Gbps) ports
LAN:2 RJ45 Gigabit Ethernet LAN ports
1 RJ45 Dedicated IPMI LAN port
USB:2 USB 3.0 ports (rear)
4 USB 2.0 ports (2 rear + 2 via header)
VGA:1 VGA port
Others:1 COM port (rear)
2 SATA DOM power connector
1 TPM 2.0 header
PCI-Express:3 PCI-E 3.0 x8
2 PCI-E 3.0 x16
M.2:Interface: PCI-E 3.0 x2
Form factor: 22110
Support SATA devices
Chassis ( Optimized for H11DSi )
BIOS Type:AMI 128Mb SPI Flash EEPROM
BIOS Features:Plug and Play (PnP)
USB Keyboard Support
Software:Super Doctor 5
IPMI 2.0, KVM with dedicated LAN
Power Configurations:ACPI Power Management
Power-on mode control for AC power loss recovery
PC Health Monitoring
CPU:Monitors CPU Core Voltages, +1.5V, +1.8V, +12V +5V, +5V standby
CPU switching voltage regulator
Supports system management utility
FAN:Up to 8-fan status tachometer monitoring
Up to eight 4-pin fan headers
Dual Cooling Zone
Status monitor for speed control
Pulse Width Modulated (PWM) fan connectors
Temperature:Monitoring for CPU and chassis environment
CPU Thermal Trip Support
Thermal control for 8x Fan connectors
I2C Temperature Sensing Logic
LED:CPU / System Overheat LED
Other Features:Chassis Intrusion Detection
Chassis Intrusion Header
Operating Environment / Compliance
Environmental Specifications:Operating Temperature:10oC to 35oC (50oF to 95oF)
Non-operating Temperature: -40oC to 70oC (-40oF to 158oF)
Operating Relative Humidity: 8% to 90% (non-condensing)
Non-operating Relative Humidity: 5% to 95% (non-condensing)
Item Dimension (L inchxW inchxH inch)
Orders below $100: $10 flat rate
Orders above $100: FREE
Currently we only ship within the US.
You have 14 calendar days to return an item from the date you received it.
To be eligible for a return, your item must be unopened in the same condition that you received it.
Your item must be in the original packaging.
Your item needs to have the receipt or proof of purchase.
Once we receive your item, we will inspect it and notify you that we have received your returned
item. We will immediately notify you on the status of your refund after inspecting the item.
If your return is approved, we will initiate a refund to your credit card (or original method of payment).
You will receive the credit within a certain amount of days, depending on your card issuer's policies.
You will be responsible for paying for your own shipping costs for returning your item. Shipping costs are nonrefundable.
If you receive a refund, the cost of return shipping will be deducted from your refund.
If you have any questions on how to return your item to us, contact us.